5-1/2" (140mm) spread rigid gooseneck (120X)
· 8" (203mm) centers
· Rosespray outlet (B-0103)
· 6-3/4" (171mm) clearance deck to rosespray outlet
· 4" (102mm) wrist action handles (B-WH4)

· 5-1/2" (140mm) spread rigid gooseneck (120X)
· 8" (203mm) centers
· Stream regulator outlet (B-LT)
· 5-1/4" (133mm) centerline to outlet
· 4" (102mm) wrist action handles (B-WH4)

 

5-1/2" (140mm) spread rigid gooseneck (120X)
· 8" (203mm) centers
· Rosespray outlet (B-0103)
· 4-1/2" (114mm) centerline to sprayface
· 4" (102mm) wrist action handles (B-WH4)
· Built in screw driver stops (163A)
 

5-1/2" (140mm) spread rigid gooseneck (120X)
· Adjustable inlets 3-3/4" (95mm) to 12-3/4" (319mm)
· Rosespray outlet (B-0103)
· 4" (102mm) wrist action handles (B-WH4)
· 1/2" NPT female eccentric flanged inlets with screwdriver stop (00XX)
· 5-3/8" (137mm) clearance to rosespray

 • Straight loose key stop
• 3/8" IPS female inlet & outlet
 
B-0416 with 1/2" IPS female inlet & outlet

• Angle loose key stop
• 1/2" IPS female inlet & outlet

B-0417 with 3/8" IPS female inlet and outlet

· 2" nipple with 1/2" NPT threads typical both ends

T&S Brass  
 

SUPPLY NIPPLE

 • All aluminum, fastens to wall and supports valve body of knee action valve
• Approx. 12" (305mm) from wall to valve body mounting holes
• 3-1/4" (83mm) of knee stirrup extends in front of 20" (508mm) back to front basin
• Can be shortened by cutting aluminum pipe
• Available in longer lengths up to 24" as a special order

 • Cast aluminum
• Approx. 11-1/2" (292mm) wall to front
• For installation where knee action valve cannot be fastened to horizontal sink support bar
• Bracket supports inlet pipes
  

  Heavy duty cam acting stirrup
• Valve will remain in set position for hot, cold or mixed water
• 1/2" IPS female inlets
• 2-1/2" (64mm) centers
• 1/2" IPS female outlet

  Double pedal valve, floor mounted

• Inlets on 2-1/2" (64mm) centers
• 1" (25mm) from floor to center of inlets

B-0502-BT same as B-0502 except with 1/2" British threads
B-2080 - B-0502 valve less hot and cold pedals

  Inlets on 2-1/2" (64mm) centers
• 1" (25mm) from wall to center of  inlets
• Wall to pedal tips approx. 13-3/4" (349mm) 
  
B-2269 with 1/2" British threads
B-0504-LKS same as B-0504, but with straight loose key stops

  Inlets on 2-1/2" (64mm) centers

• 1" (25mm) from wall to center of inlets
• Wall to pedal tips approx. 13-3/4" (349mm)
• Angle loose key stops (B-1350)
• Top mounted volume control angle loose key stop (B-1355)

B-0504-02 same as B-0504-01, but with volume control straight loose key stop (B-0416)

 • Double pedal valve, ledge mounted
• Inlets on 2-1/2" (64mm) centers
• Rough chrome plated

 • Single pedal valve, floor mounted
• 1" (25mm) floor to center of inlet

 " Single pedal for hot or cold water
" 1" (25mm) from wall to center of  inlet
" Wall to pedal tip approx. 13-3/4" (349mm)

 • Inlets on 2-1/2" (64mm) centers
• Approximately 24" floor to base of valve
• Pedals 6-1/4" long

 Wall mounted
• 3/8" NPT inlets and outlet

• Deck mounted base
• 6" (152mm) elevated swing nozzle (059X)
• 3/8" IPS chrome plated riser
• 21" (533mm) clearance deck to outlet
• 1/4" IPS union tailpiece connection
 

· Range back mounted faucet
· For cold water only
· On-Off control actuated when nozzle swings to right or left
· 13-3/4"(349mm) nozzle with aerator
· 3/8" NPT female inlet