• All aluminum, fastens to wall and supports valve body of knee action valve
• Approx. 12" (305mm) from wall to valve body mounting holes
• 3-1/4" (83mm) of knee stirrup extends in front of 20" (508mm) back to front basin
• Can be shortened by cutting aluminum pipe
• Available in longer lengths up to 24" as a special order

 • Cast aluminum
• Approx. 11-1/2" (292mm) wall to front
• For installation where knee action valve cannot be fastened to horizontal sink support bar
• Bracket supports inlet pipes
  

  Heavy duty cam acting stirrup
• Valve will remain in set position for hot, cold or mixed water
• 1/2" IPS female inlets
• 2-1/2" (64mm) centers
• 1/2" IPS female outlet

  Double pedal valve, floor mounted

• Inlets on 2-1/2" (64mm) centers
• 1" (25mm) from floor to center of inlets

B-0502-BT same as B-0502 except with 1/2" British threads
B-2080 - B-0502 valve less hot and cold pedals

  Inlets on 2-1/2" (64mm) centers
• 1" (25mm) from wall to center of  inlets
• Wall to pedal tips approx. 13-3/4" (349mm) 
  
B-2269 with 1/2" British threads
B-0504-LKS same as B-0504, but with straight loose key stops

  Inlets on 2-1/2" (64mm) centers

• 1" (25mm) from wall to center of inlets
• Wall to pedal tips approx. 13-3/4" (349mm)
• Angle loose key stops (B-1350)
• Top mounted volume control angle loose key stop (B-1355)

B-0504-02 same as B-0504-01, but with volume control straight loose key stop (B-0416)

 • Double pedal valve, ledge mounted
• Inlets on 2-1/2" (64mm) centers
• Rough chrome plated

 • Single pedal valve, floor mounted
• 1" (25mm) floor to center of inlet

 " Single pedal for hot or cold water
" 1" (25mm) from wall to center of  inlet
" Wall to pedal tip approx. 13-3/4" (349mm)

 • Inlets on 2-1/2" (64mm) centers
• Approximately 24" floor to base of valve
• Pedals 6-1/4" long