• Jonal plastic panel flange & angle serrated tip • Highly resistant to acids, alkalies & solvents • Ideal for use in fume hoods • 3/8" IPS female inlet • 1-3/4" (44mm) diameter flange • 3" (75mm) length • See chart for available colors with services noted Color Service Blue Gas Green Cold Water Yellow Vacuum Orange Air White For services not identified
T&S Brass
• Ground key hose cock • 3/8" IPS male inlet • Ten-serration hose tip • Plastic index: specify gas, air, or vac • Length 4" (102mm), height 2-1/16" (52mm) • Not recommended for pressures in excess of 30 PSI • Not for use with oxygen
Laboratory turret • 3/8" IPS female bottom inlet • 3/8" IPS female side outlet (one) • Black plastic mounting gasket included • 2" (51mm) diameter, height 2- 9/16" (65mm) • 2" (51mm) height to center of outlet
Turret with 2 hose cocks • 3/8" IPS male inlet • Specify gas, air or vac • Black plastic mounting gasket included • Diameter 2" (51mm), height 3-1/2" (89mm) • Hose cocks at 90Þ
• Panel flange with hose cock • 3/8" IPS female inlet • Ground key hose cock • 10 serration hose tip • 4-1/2" (114mm) length • 2" (51mm) flange diameter • Specify gas, air, vac T&S Brass
Remote control angle valve unit • 3/8" IPS female inlet & outlet • Outlets at 90 degree to inlet • Stainless steel floating cone and removable seat • Specify gas, air or vac • Specify distance from center of valve to face of panel - Standard 18" • Furnished with polished chrome guide for use on wood furniture
• Polished chrome plated brass angle guide bushing • For use on wood furniture • Furnished with two long oval head screws • 2" (51mm) x 1-7/16" (37mm) • 45 degree angle standard - can be furnished at any angle from 30 degree to 60 degree in sufficient quantity • Mounting holes on 1-9/16" (40mm) centers
" Filter pump (aspirator) " 3/8" IPS male inlet " 2-7/8" overall length " Creates suction by water flow " Avoid splashing by attaching BL-5500-02 splash eliminator on outlet
• Aerator with adapter • 3/8" NPSM male adapter • Fits lab goosenecks T&S Brass
Spray head • 1-1/4" (31mm) diameter spray face • 3/8" NPSM male inlet • Brass, chrome plated • 7/8" (22mm) long T&S Brass
• Straight serrated tip • 3/8" (9mm) IPS male inlet • 10 serrations • 2-5/8" (67mm) long • Fits lab goosenecks & nozzles
• Anti-siphon vacuum breaker • 3/8" IPS male inlet & female outlet • Prevents backflow • Used on outlets of goosenecks • Use BL-5550-04 hose tip on outlet
• Vandal resistant aerator
• 3/8" NPSM male inlet • Use special wrench to attach (included) • 3/4" total length • Fits lab goosenecks & nozzles
• Straight serrated tip • 3/8" IPS male inlet • 10 serrations • Smaller hex shoulder than on BL- 5550-04 for aesthetic reasons • For use on turrets & panel flanges T&S Brass
• Rigid gooseneck with vacuum breaker • 3/8" IPS male inlet • Removable 10 serration hose tip • 8-7/8" (225mm) total height • 5-7/16" (138mm) spread
Upright Rod- 21/2" x 36" (914mm) threaded to fit BL-9000-04 adapter
• Aluminum adapter • Threaded to receive BL-9000-2 and BL-9000-3 • Fits into BL-9000-09 flush plate • 2" (51mm) long
• Flush plate • 1-1/8" (29mm) diameter thread • Fits table tops from 3/4" to 1-1/2" (38mm) thick • Fits into recess in table to receive BL-9000-01 upright rods • Satin chrome plated brass
Clamp • For 3/4" aluminum rods • Satin aluminum finish
• Flush plate with crown top • Same as BL-9000-09 except with convex top surface for use on tables without recess
Pure French elegance
Never out of style
Classic white range
